Ash separator contains several parts, because of its long-term operation would have a natural wear and tear, and therefore must be checked regularly repaired to avoid excessive wear of parts and affect the normal operation, in order to allow users to use fly ash separator can all work smoothly, engineers and technicians tell you a general overhaul of the content, there are several specific programs. ① check the wear of the bearing, remove the bearing grease residue, but be careful not allow dust to enter the bearing; ② Check the gear for wear; ③ check the connecting bolts are loose, and tighten; ④ separator worn parts most likely to have small fan, sprinkle reel, if found excessive wear should be repaired or replaced; ⑤ periodic replacement of gear lubricants; the seals ⑥ check the connections (including seals), should be replaced immediately if worn rupture; ⑦ Check the coupling and pin wear, and replace if necessary. Whether ash separator separator or other types of equipment, must do regular inspection and maintenance work, which is very necessary, it is related to the production process will happen if some can be completely avoided accidents, so in order to work safe, steady, the operator must take the content to do a good job, this can save you more trouble, but also to improve production efficiency. For more information you can call our service hotline, you can also visit our official website for more information www.rdlhbsb.com!